lucalizaranzu/Shmingo-HAL
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

For sensor project

Browse Source
This commit is contained in:
Ea-r-th
2025-11-06 02:40:54 -08:00
parent a1458de235
commit 63fab62727
8 changed files with 113 additions and 46 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
SHAL/Include/Peripheral/EXT/Reg/SHAL_EXTI_REG_L432KC.h
View File

@@ -10,6 +10,15 @@
#define EXTI_PENDING_REG(line) ((line) < 32 ? EXTI->PR1 : EXTI->PR2)
static inline SHAL_EXTI_Control_Register getEXTIControlRegister(uint32_t line){
uint8_t maskOffset = line % 4; //Each register has four 4-bit wide fields
uint8_t registerOffset = line / 4; //Composed of four registers with 4 fields each
SHAL_EXTI_Control_Register res = {&SYSCFG->EXTICR[registerOffset], maskOffset};
return res;
}
static inline SHAL_EXTI_Interrupt_Mask_Register getEXTIInterruptMaskRegister(uint32_t line){
volatile uint32_t* reg = line < 32 ? &EXTI->IMR1 : &EXTI->IMR2;
return {reg};;

5
SHAL/Include/Peripheral/EXT/SHAL_EXTI_TYPES.h
View File

@@ -19,4 +19,9 @@ struct SHAL_EXTI_Falling_Trigger_Selection_Register {
volatile uint32_t* reg;
};
struct SHAL_EXTI_Control_Register {
volatile uint32_t* reg;
uint32_t offset;
};
#endif //SHMINGO_HAL_SHAL_EXTI_TYPES_H

10
SHAL/Include/Peripheral/GPIO/Reg/SHAL_GPIO_REG_L432KC.h
View File

@@ -71,6 +71,10 @@ constexpr uint8_t getGPIOPinNumber(GPIO_Key key){
return static_cast<uint8_t>(key) % 16;
}
constexpr uint8_t getGPIOPortNUmber(GPIO_Key key){
return static_cast<uint8_t>(key) / 16;
}
constexpr SHAL_GPIO_EXTI_Register getGPIOEXTICR(const GPIO_Key g){
switch(g) {
case GPIO_Key::A0: return {&SYSCFG->EXTICR[0],SYSCFG_EXTICR1_EXTI0_PA,EXTI0_IRQn};
@@ -158,6 +162,12 @@ static inline SHAL_GPIO_Output_Data_Register getGPIOOutputDataRegister(const GPI
return {reg,offset};
}
static inline SHAL_GPIO_Input_Data_Register getGPIOInputDataRegister(const GPIO_Key key){
volatile uint32_t* reg = &GPIO_TABLE[static_cast<uint8_t>(key) / 16]->IDR;
uint32_t offset = static_cast<uint8_t>(key) % 16;
return {reg,offset};
}
constexpr SHAL_GPIO_Port_Info getGPIOPortInfo(GPIO_Key key){
switch(key){
case GPIO_Key::A0:

1
SHAL/Include/Peripheral/GPIO/SHAL_GPIO.h
View File

@@ -29,6 +29,7 @@ public:
/// \return ADC result
uint16_t analogRead(SHAL_ADC_SampleTime sampleTime = SHAL_ADC_SampleTime::C8);
uint16_t digitalRead();
void setAlternateFunction(GPIO_Alternate_Function AF) volatile;
void setAlternateFunction(GPIO_Alternate_Function_Mapping AF) volatile;

5
SHAL/Include/Peripheral/GPIO/SHAL_GPIO_TYPES.h
View File

@@ -50,6 +50,11 @@ struct SHAL_GPIO_Output_Data_Register {
uint32_t offset;
};
struct SHAL_GPIO_Input_Data_Register {
volatile uint32_t* reg;
uint32_t offset;
};
struct SHAL_GPIO_Port_Info{
uint8_t number;
SHAL_ADC_Channel ADCChannel;

43
SHAL/Src/STM32L4XX/Peripheral/GPIO/SHAL_GPIO.cpp
View File

@@ -64,7 +64,6 @@ SHAL_Result SHAL_GPIO::setPinMode(PinMode mode) volatile {
SHAL_UART2.sendString(buff);
return SHAL_Result::ERROR;
}
SHAL_print_register(pinModeReg.reg);
SHAL_set_bits(pinModeReg.reg,2,static_cast<uint8_t>(mode),pinModeReg.offset); //Set mode
@@ -73,31 +72,20 @@ SHAL_Result SHAL_GPIO::setPinMode(PinMode mode) volatile {
void SHAL_GPIO::useAsExternalInterrupt(TriggerMode mode, EXTICallback callback) {
uint32_t gpioPin = getGPIOPinNumber(m_GPIO_KEY);
setPinMode(PinMode::INPUT_MODE); //Explicitly set mode to input
/* ---- Connect PB6 to EXTI6 via SYSCFG ---- */
uint32_t port_b_val = 1; // 0=A, 1=B, 2=C, 3=D, etc.
SYSCFG->EXTICR[1] &= ~(0xFUL << 8); // Clear EXTI6 bits (bits 8-11)
SYSCFG->EXTICR[1] |= (port_b_val << 8); // Set EXTI6 to PB6
RCC->APB2ENR |= RCC_APB2ENR_SYSCFGEN; //Enable EXT, TODO Add this to a global SHAL_GLOBAL_TYPES.h file
NVIC_EnableIRQ(getGPIOEXTICR(m_GPIO_KEY).IRQN); //Enable IRQN for pin
/* ---- Configure EXTI line 6 ---- */
EXTI->IMR1 |= (1UL << 6); // Unmask line 6
EXTI->RTSR1 |= (1UL << 6); // Rising trigger enable
EXTI->FTSR1 &= ~(1UL << 6); // Falling trigger disable
auto ext_imr = getEXTIInterruptMaskRegister(gpioPin);
SHAL_set_bits(ext_imr.reg,1,1,gpioPin);
SHAL_GPIO_EXTI_Register EXTILineEnable = getGPIOEXTICR(m_GPIO_KEY);
*EXTILineEnable.EXT_ICR |= EXTILineEnable.mask; //Set bits to enable correct port on correct line TODO Find way to clear bits before
if(mode == TriggerMode::RISING_EDGE || mode == TriggerMode::RISING_FALLING_EDGE) {
auto rising_trigger_selection_reg = getEXTIRisingTriggerSelectionRegister(gpioPin);
SHAL_set_bits(rising_trigger_selection_reg.reg, 1, 1, gpioPin);
}
if(mode == TriggerMode::FALLING_EDGE || mode == TriggerMode::RISING_FALLING_EDGE) {
auto falling_trigger_selection_reg = getEXTIFallingTriggerSelectionRegister(gpioPin);
SHAL_set_bits(falling_trigger_selection_reg.reg,1,1,gpioPin);
}
//Set callback
registerEXTICallback(m_GPIO_KEY,callback);
/* ---- Enable NVIC interrupt for EXTI lines [9:5] ---- */
NVIC_SetPriority(EXTI9_5_IRQn, 2);
NVIC_EnableIRQ(EXTI9_5_IRQn);
__enable_irq(); //Enable IRQ just in case
}
@@ -115,6 +103,15 @@ void SHAL_GPIO::setAlternateFunction(GPIO_Alternate_Function_Mapping AF) volatil
SHAL_set_bits(alternateFunctionReg.reg,4,static_cast<uint8_t>(AF),alternateFunctionReg.offset);
}
uint16_t SHAL_GPIO::digitalRead() {
auto inputDataReg = getGPIOInputDataRegister(m_GPIO_KEY);
if((*inputDataReg.reg & (1 << 6)) != 0){
return 1;
}
return 0;
}
SHAL_GPIO& GPIOManager::get(GPIO_Key key) {

3
SHAL/Src/STM32L4XX/Peripheral/Timer/SHAL_TIM.cpp
View File

@@ -17,11 +17,14 @@ void Timer::start() {
auto control_reg = getTimerControlRegister1(m_key);
auto event_generation_reg = getTimerEventGenerationRegister(m_key);
auto status_reg = getTimerStatusRegister(m_key);
SHAL_apply_bitmask(control_reg.reg, control_reg.counter_enable_mask); //Enable counter
SHAL_apply_bitmask(control_reg.reg, control_reg.auto_reload_preload_enable_mask); //Preload enable (buffer)
SHAL_apply_bitmask(event_generation_reg.reg, event_generation_reg.update_generation_mask);
SHAL_clear_bitmask(status_reg.reg,status_reg.update_interrupt_flag_mask);
enableInterrupt();
}

83
SHAL/Src/main.cpp
View File

@@ -10,27 +10,47 @@ GPIO_Key gpios[6] = {
GPIO_Key::A7,
};
uint16_t vals[6] = {0,0,0,0,0,0};
uint8_t currentSensor = 0;
bool isAlarmBeeping = false;
bool isCalibrateButtonHigh = false;
bool prevIsCalibrateButtonHigh = false;
uint16_t sensorThresholds[6] = {4096,4096,4096,4096,4096,4096};
void timer2callback(){
uint16_t val[6];
int cyclesPerPrint = 4;
int currentCycle = 0;
for(int i = 0; i < 6; i++){
val[i] = GPIOManager::get(gpios[i]).analogRead(SHAL_ADC_SampleTime::C8);
SHAL_delay_ms(30);
void getSensorData(){
vals[currentSensor] = GPIOManager::get(gpios[currentSensor]).analogRead(SHAL_ADC_SampleTime::C8);
if(currentSensor == 5 && currentCycle == cyclesPerPrint - 1){
char buff[64];
sprintf(buff, "%d, %d, %d, %d, %d, %d\r\n", vals[0],vals[1],vals[2],vals[3],vals[4],vals[5]);
SHAL_UART2.sendString(buff);
}
char buff[64];
sprintf(buff, "%d, %d, %d, %d, %d, %d\r\n", val[0],val[1],val[2],val[3],val[4],val[5]);
SHAL_UART2.sendString(buff);
currentSensor = (currentSensor + 1) % 6;
currentCycle = (currentCycle + 1) % cyclesPerPrint;
}
void calibrateThresholds(){
for(int i = 0; i < 6; i++){
uint16_t sensorVal = GPIOManager::get(gpios[i]).analogRead(SHAL_ADC_SampleTime::C8);
sensorThresholds[i] = sensorVal;
SHAL_delay_ms(80);
}
char buff[80];
sprintf(buff, "Thresholds: %d, %d, %d, %d, %d, %d\r\n", sensorThresholds[0],sensorThresholds[1],sensorThresholds[2],sensorThresholds[3],sensorThresholds[4],sensorThresholds[5]);
SHAL_UART2.sendString(buff);
}
void PWMToggle(){
if(!isAlarmBeeping){
@@ -42,13 +62,14 @@ void PWMToggle(){
isAlarmBeeping = !isAlarmBeeping;
}
void buttonCallback(){
void buttonHoldCallback(){
PIN(B3).toggle();
}
SHAL_TIM7.stop(); //Stop this timer
void calibrateSensors(){
PIN(B3).setHigh();
SHAL_TIM7.stop();
SHAL_TIM2.stop(); //Stop reading from ADC
calibrateThresholds();
SHAL_TIM2.start(); //Restart value checks
}
int main() {
@@ -67,12 +88,9 @@ int main() {
PIN(B0).setAlternateFunction(GPIO_Alternate_Function_Mapping::B0_TIM1CH2N);
PIN(B6).setPinMode(PinMode::INPUT_MODE);
PIN(B6).useAsExternalInterrupt(TriggerMode::RISING_FALLING_EDGE,buttonCallback);
SHAL_TIM2.init(4000000,400);
SHAL_TIM2.setCallbackFunc(timer2callback);
SHAL_TIM2.setCallbackFunc(getSensorData);
SHAL_TIM2.enableInterrupt();
SHAL_TIM2.start();
@@ -86,13 +104,32 @@ int main() {
SHAL_TIM6.enableInterrupt();
SHAL_TIM6.start();
SHAL_TIM7.init(4000000,3000);
SHAL_TIM7.setCallbackFunc(calibrateSensors);
SHAL_TIM7.init(4000000,6000);
SHAL_TIM7.setCallbackFunc(buttonHoldCallback);
SHAL_TIM7.enableInterrupt();
//SHAL_TIM7.start();
PIN(B6).setPinMode(PinMode::INPUT_MODE);
PIN(B3).setPinMode(PinMode::OUTPUT_MODE); //Test
PIN(B3).setLow();
while (true) {
SHAL_UART2.sendString("HELLO\r\n");
//Retarded polling based button methods cause EXTI decided to not work on L432KC for some stupid reason at the last second
if(!(PIN(B6).digitalRead() == 1)){
//SHAL_UART2.sendString("High\r\n");
if(!prevIsCalibrateButtonHigh){
SHAL_TIM7.start();
}
prevIsCalibrateButtonHigh = true;
}
else{
//SHAL_UART2.sendString("Low\r\n");
if(prevIsCalibrateButtonHigh){
//Button released
SHAL_TIM7.stop();
}
prevIsCalibrateButtonHigh = false;
}
}
}